Galaxy Test & Calibration Lab

(NABL ACCREDITATION)

 Home

Type of Instruments for Calibration
                 TEMPERATURE                           TEMPERATURE   
S.No.       INSTRUMENT NAME Rate S.No.             INSTRUMENT NAME Rate
1 Digital Temp. Indicator   10 Temperature Transmitters (Up to15000C)  
  up to  18000C ( 5 Points )     (a) 05 Points  
2 Digital / Blind Temp. Controller      (b) Additionalcharges per point  
  up to  18000C ( 5 Points )   11 Hygrometer( 0 to 1000C)  
3 PID Controller      (a) Dry - Wet Type  
  up to  18000C ( 5 Points )     (I) 05 Points  
4 Temp. Scanner ( per Channel)     (ii) Additional charges per point  
  up to  18000C ( 5 Points )     (b) Digital / Analog ( 0-1000C & upto 95% RH )
  (a) Per Channel ( up to 03 channel )     (I) 05 Points  
  (b) Additional charges per channel )     (ii) Additional charges per point  
5 Glass Thermometer (Up to 6000C)   12 Humidity Chamber( Up to 95% RH )  
  (a) 05Points      (I) 05 Points  
  (b) Additional charges per point     (ii) Additional charges per point  
6 RTD (Up to 3000C)   13 Incubator / Oven ( Up to 15000C )  
  (a) 05Points      (I) 05 Points   
  (b) Additional charges per point     (ii) Additional charges per point  
7 Thermocouple (Up to 15000C)   14 Furnace / Dry Block Calibration   
  (a) 05Points      ( Up to 15000C)  
  (b) Additional charges per point     (I) 05 Points  
8 Temperature Gauge (Up to 15000C)     (ii) Additional charges per point  
  (a) 05Points    15 Temperature Calibrator  
  (b) Additional charges per point     mV & mA ( Single Channel)  
9 I.R. Thermometer ( Up to 14000C)     mV & mA ( Double Channel)  
         
                MECHANICAL                    MECHANICAL  
S.No. INSTRUMENT NAME Rate S.No.    INSTRUMENT NAME Rate
1  Vernier Caliper(Electronic/Dial/Scale)   4 Inside Micrometer  
  (a) 0 - 150 mm     (a) 0 - 25 mm / 25 - 50 mm  
  (b) 0 - 200 mm     (b) 50 - 200 mm  
  (c) 0 - 300 mm     (c) 50 - 300 mm  
  (d) 0 - 450 mm     (d) 50 - 500 mm  
  (e) 0 - 600 mm     (e) Above 500 mm  
  (f) - above 600 mm   5 Depth Micrometer ( Electronic/Scale )  
2 Height Gauge (Electronic/Dial/Scale)     (a) 0 - 25 mm / 25 - 50 mm  
  (a) 0 - -150 mm     (b) 0 - 50 mm  
  (b) 0 - 300 mm     (c) 0 - 300 mm  
  (c) 0 - 450 mm   6 Dail Gauge ( Plunger Type )  
  (d) 0 - 600 mm   7 Dail Gauge ( Lever Type )  
  (e)Above 600 mm   8 Puppy Dial  
3 Depth Gauge(Electronic/Dial/Scale)   9 Dial Bore Gauge  
  (a) 0 - -150 mm     (a) without Dial  
  (b) 0 - 300 mm     (b) with Dial  
  (c) 0 - 450 mm   10 Plain Plug Gauge ( GO / NOGO )  
  (d) 0 - 600 mm     (a) Up to 50 mm / 50 - 100 mm  
  (e)Above 600 mm     (b) 101 - 300 mm / 301 - 401 mm  

 
                MECHANICAL                     MECHANICAL  
S.No.              INSTRUMENT NAME Rate S.No.                 INSTRUMENT NAME Rate
11 Thickness Gauge   33 Slip Gauge Set ( Grade 0,1,2 )  
  (a) 0 - 100 mm     (a) up to 10 Pcs.  
  (b) Above 100 mm      (b) 10 to 50 Pcs.  
12 Outside Micrometer     (c) Above 50 Pcs  
  ( Electronic/Dial/Scale )   34 Slip Gauge Accessories ( Per Piece )  
  (a) 0 - -25 mm/ 25 - 50 mm /   35 Spirit Level ( Any Range )  
      50 - 75 / 75 - 100 mm   36 Square Master ( Any Range )  
  (b)101 - 200 mm   37 Steel wire Gauge ( Any Range )  
  (c) 201 - 300 mm   38 Steel scale  
  (d) 301 - 400 mm     (a) 0 - 600 mm  
  (e) 401 - 500 mm     (b) 0 - 1000 mm  
  (f) Above 500 mm   39 Steel scale  
14 Plain Ring Gauge     (a) 0 - 600 mm  
  (a) Up to 50 mm / 51 - 150 mm     (b) 0 - 1000 mm  
  (b) 151 - 250 mm / 251 - 400 mm     (c) Above 1000 mm  
15 Measuring Pin Gauge   40 Measuring Tape  
  (a) Up to 10 Pcs ( Per Piece )     (a) 0 - 5 meter  
  (b) Above 10 Pcs ( per Piece )     (b)0 - 15 meter  
16 Feeler Gauge( Per blade )     (c) 0 - 50 meter  
17 Slot Gauge   41 Special Jigs  
18 Taper Gauge   42 Hole Master  
19 Snap Gauge   43 Flang Micrometer  
  (a) Up to 50 mm / 51 - 100 mm     (a) 0 - 50 mm  
  (b) Up to 101-200 mm / 201-400 mm     (b) 50 - 300 mm  
20 Alignment Tool     (c) 100 - 300 mm  
21 Electronic Dial Calibration Tester   44 Bevel Protector / Angle Protector  
  (a) 0 - 10 mm   45 Caliper Checker ( upto 600 mm)  
  (b) 0 - 25 mm   46 Height Master  
22 Electronic Probe     (a) 0 - 300 mm  
  (a) 0 - 10 mm     (b) 0 - 600 mm  
  (b) 0 - 25 mm   47 Rockwell Hardness Tester  
23 Flush Gauge   48 Profile Projector  
24 Radius Gauge     (a) 300 mm sq.dia  
  (a) 01 Set Up to 25 Pcs.     (b) 600 mm sq. dia  
  (b) Additional charges per piece   49 Sine Bar ( Any Range )  
25 Pick Test Dial   50 Surface Plate(Per Sq. Cm)  
26 VEE Block   51 Tensile Testing Machine  
  (a) Up to 6"     (a) 250 Kgf to 1000 Kgf  
  (b) Above 8"     (b) Up to 5000 Kgf  
27 Ford Cup   52 Try Square (Any Range)  
28 Pressing Master Gauge   53 Angle Plate  
29 Inside/Outside Compass ( 0-100 mm)   54 Bench Tester  
30 Brinnel Hardness Tester        
31 Thread Plug Gauge        
32 Thread Ring Gauge        

 
              ELECTRICAL               ELECTRICAL  
S.No.            INSTRUMENT NAME Rate S.No.             INSTRUMENT NAME Rate
1 Micro/Milli/Ampere Meter(AC/DC)   11 Millivolt Calibrator  
2 Milli Ampere Calibrator     (a) Single Range  
  (a) Single Range     (b) Dual Range  
  (b) Dual Range   12 Multifunction Calibrator  
3 Micro/Milli Voltmeter(AC/DC)   13 Digital Multimeter  
4 Ohm Meter/Resistance Box     (a) 31/2 Digits  
  Acc. = + 0.1%     (b) 41/2 Digits  
  Acc. = + 0.002%     ( c) 51/2 Digits  
5 Micro / Milli /Mega Ohm Meter   14 Tong Tester / Clamp Meter  
6 Ampere Meter (DC)   15 Insulation Tester / Megger  
  0-40 Amp.   16 Regulated power Supply( AC / DC)  
  (a) Single Range   17 Lux Meter  
  (b) Additional Charges per range   18 Watt Meter  
  CT Based (Any Range)     (a) Single phase  
  (a) Single Range     (i) Single Range  
  (b) Additional Charges per range     (ii) Additional charges per range  
  Ampere Meter (AC) 0-33 Amp.     (b)Three phase  
  (a) Single Range     (i) Single Range  
  (b) Additional Charges per range     (b) Additional charges per range  
  C.T. Based (Any Range)   19 Current Transformer  
  (a) Single Range     (a) Per Range  
  (b) Additional Charges per range     (b) Additional charges per range  
7 Voltmeter (DC)   20 Cut Through Tester  
  0-1000 Volt.   21 Digital Panel Meter  
  (a) Single Range   22 V - A - W Meter  
  (b) Additional Charges per range   23 V -A - H - Hz Meter  
  P.T. Based (Any Range)   24 Million Megaohm Meter  
  (a) Single Range   25 K.V. Meter  
  (b) Additional Charges per range   26 Variac.  
  Voltmeter (AC)   27 Potential Transformer  
  0-1000 Volt.     (a) Per Range  
  (a) Single Range     (b) Additional charges per range  
  (b) Additional Charges per range   28 Energy Meter  
  P.T based ( Any Range )   29 Inductive Load  
  (a) Single range   30 K.W.H. Meter  
  (b) additional charges per channel   31 LCR Meter  
8 Frequency Meter   32 P.F. Meter  
9 L.V.D.T. Senser   33 Spark Tester  
10 High Voltage Tester   34 Ampere - Hour Meter  
         
            PRESSURE AND VACUUM             PRESSURE AND VACUUM  
S.No.          INSTRUMENT NAME Rate S.No.              INSTRUMENT NAME Rate
1 Pressure Gauge( Up to 600Kg/Cm2)   4  Manometer ( 0 - 760mmHg)  
2 Vacuum Gauge/Barometer(0-760mmHg)   5 Dead Weight Tester( Up to 600 Kg / Cm2)  
3 Pressure / Vacuum Transmitter   6 Digital Pressure Controller  

 
                   FORCE                           FORCE  
S.No. INSTRUMENT NAME Rate S.No. INSTRUMENT NAME Rate
1 Load Cell   3 Torque Indicator  
  (a) Up to 200 gm     (a) Up to 200 gm  
  (b) 200 gm to 2 Kg     (b) 200 gm to 2 Kg  
  (c) 2 Kg to 5 Kg     (c) 2 Kg to 5 Kg  
  (d) 5 Kg to 10 Kg     (d) 5 Kg to 10 Kg  
  (e) 10 Kg to 20 Kg     (e) 10 Kg to 20 Kg  
  (f) Above 20 Kg     (f) Above 20 Kg  
2 Rubber Hardness Tester   4 Push Pull Gauge / Meter ( 0 - 300 Kg)  
  (a) Shore A   5 Torque Wrench ( 0 - 550 N.m. )  
  (b) Shore D        
         
                       MASS                             MASS  
S.No.        INSTRUMENT NAME Rate S.No.      INSTRUMENT NAME Rate
1 Digital / Analog Weighing Balance   2 Standard Weight Box  
  (a) Up to 200 gm     (a) Up to 200 gm  
  (b) Up to 500 gm     (b) Additional charges per weight(12 pcs)  
  (c) Up to 5 Kg   3 Standard weight Box  
  (d) Up to 10 Kg     (a) Up to 500 gm  
  (e) Up to 20 Kg     (b) Additional charges per weight(12 pcs)  
  (f) Up to 30 Kg   4 Standard Weight Box  
  (g) Up to 50 Kg     (a) Up to 5 Kg ( Each )  
  (h) Up to 100 Kg     (b) 5 Kg to 20 Kg ( Each )  
  (I) Up to 300 Kg     (c) 20 Kg to 50 Kg ( Each )  
  (j) Above 300 Kg        
         
                     PROCESS                          PROCESS  
S.No.            INSTRUMENT NAME Rate S.No.       INSTRUMENT NAME Rate
1 Digital Timer / Counter   8 Hydrometer  
2 Stop Watch   9 Specific Gravity Balance  
3 pH Meter (0-14pH )   10 Moisture Balance  
4 Flow Meter / Rotameter(Any Range)   11 Dew Piont Tester  
5 Standard Transmitter   12 Anemometer  
6 RPM / Techometer   13 Density Bottle  
7 Digital Sound Level Meter / dB Meter   14 Coat Measure  

Back to Top